ACC RC-96 Owner's Manual page 72

Chapter Five: How to Be a Control Operator
Hints
User Coni:inand
Enable I Disable
Commands
07 CA Carrier AccesslControlt Enables carrier
access and control.
08 PC CTCSS Control Op Commandt Enables carrier
access
(crcss
required for Control
Op and Program ­
ming commands).
09 PU CTCSS ControlOplUser Cmdt Enables carrier
access,
crcss
required for Pro­
gramming, Control
Op and User com­
mands.
10 PL CTCSS Accesst
crcss
required for
access and control.
52:ME TT Access Mode Enablet Enables Touch­
Tone Access Mode.
S3 MD TT Access Mode Disablet Disables Touch­
Tone Access Mode.
81••. 88 IE... 8E Tone Panel Tone Enablet Enables tones I
through 8 on the
optional Tone
Panel.
91..•98 ID ... 8D Tone Panel Tone Disablet Disables tones 1
through 8 on the·
optional Tone .
Panel.
CA, PC, PU and PL are mutually exclusive.
ME and MD are mutually exclusive, but Touch-Tone Access can
be
enabled (ME) along with CA/PC/PU/pL condition.
When in
crcss
Access, Touch-Tone Access overrides the need
for
crcss
for access, and is an alternative to the need
forCTCSS.
The Control Op can enable or disable the User Command level.
The disable command disables all User Commands except the
Emergency Autodialer,
which can
be
left enabled while all other
User Commands are disabled. The Pad Test Disable command
allows just the Touch-Tone pad test to
be
turned off.
11 CE User Command Enablet Enables User Touch-Tone
commands.
12 CD
User Command Disablet Disables User Touch-Tone
commands.
44 • RC-96 REPEATER CONTROLLER OWNER'S MANUAL