ACC RC-96 Owner's Manual page 74

Chapter Five: How to Be a Control Operator
.,.•:;..::;J1:"
".r'"
,;';;".. ­
The Control Op Offhook command performs one of two func ­
tions.
(1) When entered over the air, it activates the patch without
regenerating signalling into the phoIie. The Control Op can then
send tones directly into the phone.
(2) Entered over the phone after calling into the repeater, this
command places the Control Op on the air. The Control Op
keeps the Touch-Tone decoder on the phone and is responsible
for hanging up. The patch timers protect against forgetting to
enter the Hangup command.
The Control Op Onhook command can be used to hang up after
calling the controller on the phone for a command session, or
following the Offhook command. The Patch Hangup User
Command (followed by a # over the phone) will also place the
phone back on hook. The Onhook command can be used over
the air to hang up the patch in case a user has defined a custom
hangup code and forgotten the code he defmed.
19
PE Autopatch Enablet Enables Autopatch.
20
PD Autopatch Disablet
Disables Autopatch.
27
LE Long Distance Enablet
Enables Autopatch long
distance.
28
LD Long Distance Disablet
Disables Autopatch long
distance.
21
UE User Autodial Enablet
Enables User Loadable
Autodialer.
22
UD User Autodial Disablet
Disables User Loadable
Autodialer.
47
AU User Autodial Unlockt
Unlocks User Loadable
Autodialer.
48
AL User Autodial Lockt
Locks User Loadable
Autodialer.
57
UU User Autodial Unhidet
Allows numbers loaded
with security option to be
read back.
58
UH User Autodial Hidet
Allows numbers loaded
with security option to
remain hidden.
23
EE Emergency Autodial Enablet
Enables Emergency
Autodialer.
24
ED Emergency Autodial Disablet
Disables Emergency
Autodialer.
60
NC Dial Needing Clickt
Requires user click to
initiate dialing.
~
46 • RC-96 REPEATER CONTROLLER OWNER'S MANUAL