ACC RC-96 Owner's Manual page 73

Hint
Link Enable / Disable
Commands
Hint
Autopatch
I
Autodial
Commands
Chapter Five: How to Be a Control Operator
41 TE Pad Test Enablet Enables Touch-Tone Pad Test
42 TO Pad Test Disablet
Disables Touch-Tone Pad Test
Disable the Emergency Autodialer as well as User Commands to
shut off all User level commands.
The Control Op can enable or disable the link or remote base
with these commands. When disabled, the Link User commands
have no effect. . .
13
LE Link Enablet
Enables link / remote base.
14 LD Link Disablet
Disables link / remote base.
The Link frequencyand mode, which: are
U
seT command func­
tions;'arealso stored in the Macro Sets so that selecting a
Macro Set can enable the link and bring it up on a certain
frequencY'·inreceiveonly'or receive/transmit.
The ControlOp can enable or disable independently the Auto­
patch, User Loadable Autodialer, and Emergency Autodialer.
When disabled, the related user command codes are ignored by
the controller. Long distance can be enabled or disabled. When
disabled, phone numbers with a leading zero or one, or longer
than seven digits are not permitted by the Autopatch. The User
Loadable Autodialer can be locked, which prevents erasing or
loading phone numbers.
The patch timer, which includes the overall timer and the activity
timer, can be enabled or disabled. (Separate overall timer values
are permitted for the Autopatch and each Autodialer, and for the
activity timer.) The patch Cover Tone can be selected for all
calls, can be shut off, or can be left user selectable (with the
Patch Cover Tone User Command) on a call by call basis.
Full-duplex can be selected forallcails, or can be left user
selectable (with the
Ful1~Duplex
User Command) on a call by
call basis.
The user can be required to click his mike to initiate Autopatch
and User Loadable Autodial calls, or the controller can be set to
"Dial Without Click". Further,all phone number readback can
be disabled as well as not requiring the click to dial with the "No
Phone Number Readback" command. User Loadable Autodial
phone number readback can be enabled by the Control Op even
for phone numbers loaded with the security option - i.e., the
. numbers can be "unhidden".
RC-96 REPEATER CONTROLLER OWNER'S MANUAL • 45