128
9.8.7 PR-23-M/MS mounting specifics
Teflon body refractometer PR-23-M/MS is connected to the process by a G1/2" female
or a 1/2" NPT process connection, Figure 9.28 below.
Important: Always install PR-23-M/MS with sensor support to prevent the sensor
weight from pulling at the non-metallic piping. See Figure 9.28 for support placement.
4.72
120.0
Note! Keep sensor
axle horizontal
Note!
Cable downwards
Figure 9.28 G1/2" female process connection (mm [in])
7.11
180.7
1
2
3
Suppor sensor here
1.24
31.5
PR-23 instruction manual
4
G1/2" or
NPT 1/2"
Grounding
screw
G1/2" or
NPT 1/2"
4