System Speed Dial - Inter-Tel Axxess 8560 User Manual

TIP:
To dial outside telephone numbers without first selecting an outgoing line,
enter a line access code (such as the Outgoing Call code "8") before the outside
telephone number.
To view how your Station Speed-Dial buttons are programmed:
NOTE:
These instructions assume that you have already programmed the feature but-
ton as a speed-dial button. See page 56 for instructions on programming your feature
buttons.
1. With the handset in the cradle, dial
II II D.
2. Press the desired Station Speed-Dial button. The name and number will be dis-
played.
3. Press
EI
or .. to exit.
To erase a Station Speed-Dial name and/or number:
1. With the handset in the cradle, dial
II II II.
2. Dial the desired location code (0-9) or press the desired Station Speed-Dial but-
ton.
3. Press I
MUTE
01
repeatedly until the name is erased.
4. Press
EI
or the ACCEPT menu button to continue.
5. Press
I
MUTE
DI
repeatedly until the number is erased.
6. Press
EI
or the ACCEPT menu button to exit.
Dialing Station Speed-Dial Numbers
To dial a Station Speed-Dial number:
If
necessary, select an outgoing line. You have the following options:
•
To use a location number: Press
ISTN SPDLI
or dial
111111
and then the desired
Station Speed-Dial location number (0-9).
• To use a Station Speed-Dial button: Press the desired Station Speed-Dial button.
System Speed Dial
Your System Administrator can store up to 1000 speed-dial numbers in System
Speed-Dial locations 000-999.
To view and/or dial System Speed-Dial numbers:
1. Press
I
SYS SPDLI
or dial
D D D.
2. Dial the location code (000-999) for the desired number.
3. Press
EI
or the ACCEPT menu button to dial the displayed number.
Axxess® Model 8560 Phone and Model 8660 IP Phone User Guide 53