Status Display And Operation; Led Indicators - Leuze electronic 50126970 Original Operating Instructions

3.5.2

Status display and operation

Indicators in the display
Table 3.1:
IO1 Switching input or switching output 1 active (function dependent on set configuration).
Default: Switching input with the "Reading gate activation" function
IO2 Switching input or switching output 2 active (function dependent on set configuration).
Default: Input with the "Teach-in" function
IO3 Switching input or switching output 3 active (function dependent on set configuration).
Default: Switching input with the "Reading gate activation" function
IO4 Switching input or switching output 4 active (function dependent on set configuration).
Default: Switching output with the "No read" function
ATT Warning (Attention)
ERR Internal device error (Error) -> The device must be sent in for inspection
Table 3.2:
USB The device is connected to a PC via the USB interface.
MS An external parameter memory is properly connected to the USB interface of the device.
Read result
The read bar code information is displayed.
3.5.3

LED indicators

PWR LED
Off
Flashes green
Green, continu-
ous light
Orange, continu-
ous light
Flashes red
Red, continuous
light
Leuze electronic
Status displays of the switching inputs/outputs
Status display of the USB interface
Device OFF
• No supply voltage
Device ok, initialization phase
• No bar code reading possible
• Voltage connected
• Self test running
• Initialization running
Device OK
• Bar code reading possible
• Self test successfully finished
• Device monitoring active
Service mode
• Bar code reading possible
• Configuration via the USB service interface
• Configuration via the display
• No data on the host interface
Device ok, warning set
• Bar code reading possible
• Temporary operating fault
Device error / parameter enable
• No bar code reading possible
BCL 608i
Device description
15