Interfaces; Operator Interface; Figure 3: Sub-D 9-Pole - KEB COMBIVERT F6 Instructions For Use Manual

INTERFAcES

4 Interfaces

4.1 Operator interface

The interface fulfills the following functions:
• Communication with the F6 device (protocol DIN 66019 II).
• Voltage supply of the operator
A combined RS485 interface is used as interface, which is provided as 9-pole Sub-D
plug connector.
Figure 3:
NOTICE
14
Sub-D 9-pole
The interface is not electrically isolated!
For remote control, the operator can be placed with a 1:1 Sub-D extension line
up to a maximum length of 10 meters (depending on the cable cross-section).