Work List; File Operations; Figure 19: Work List; Figure 20: File Operations - KEB COMBIVERT F6 Instructions For Use Manual

OPERATION OF THE OPERATOR

6.10 Work list

Inverter parameter
Operator parameter
Parameter saving
Up/Download
Work list

File operations

FTP mode
Enter test mode
Figure 19: Work list
6.11 File operations
Inverter parameter
Operator parameter
Parameter saving
Up/Download
Work list
File operations
FTP mode
Enter test mode
Figure 20: File operations
ENTER opens the submenu for the worklist.
The selection of a work list of the flash memory occurs in this
menu item.
Parameter lists, created with COMBIVIS in .wr5 format can be
transmitted via ftp to the operator.
• The compilation of the work list must be done with
COMBIVIS.
• Parameters from other Cfg IDs (for example, oper-
ator parameter in complete lists) are displayed as
"invalid address FFFFh".
ENTER opens the submenu for the file operations.
F1 : Back to the main menu
ENTER: Display of file name / size / date / time / access level.
Since there is no real-time clock integrated in the operator, new
created files have the date 2003-01-01.
F4 : Delete the file
To delete or to rename a file, the current access level
must be higher or equal to the file level. The current lev-
el is determined via the operator password or specified
when using KebFTP upon connection.
From KebFTP 1.5.0.0, the current access level is dis-
played when selecting a drive and the file level when
selecting a file.
Deleted files are automatically cleared in the back-
ground.
33