Inverter Parameter; Figure 14: Inverter Parameter - KEB COMBIVERT F6 Instructions For Use Manual

OPERATION OF THE OPERATOR

6.6 Inverter parameter

Inverter parameter
Operator parameter
Parameter saving
Up/Download
Work list
File operations
FTP mode
Enter test mode
Figure 14: Inverter parameter
24
The menu item inverter parameter includes all available drive
converter parameters on the control board. They are func-
tion-related divided into groups. They are displayed on the
operator via the internal bus.
The description of the drive converter parameters can
be taken from the programming manual F6.
For the display of the drive converter parameters, the operator
requires the appropriate configuration file, which must be stored
as *.blb file in the flash.
Alternatively, a similar type can be manually selected from
paras.blb.
Further information in the download area of
„F6 Programming manual".
www.keb.de under the search term