Open-Q™ 820 Development Kit; Introduction; Development Platform Notice; Anti-Static Handling Procedures - Intrinsyc Lantronix Open-Q 820 User Manual

3. Open-Q™ 820 Development Kit

3.1 Introduction

The Open-Q 820 provides a quick reference or evaluation platform for Qualcomm's latest 820 series -
Qualcomm APQ8096 processor. This kit is suited for Android / Linux application developers, OEMs, consumer
manufacturers, hardware component vendors, video surveillance, robotics, camera vendors, and flash chip
vendors to evaluate, optimize, test and deploy applications that can utilize the Qualcomm 820 series
technology.

3.2 Development Platform Notice

This development platform contains RF/digital hardware and software intended for engineering development,
engineering evaluation, or demonstration purposes only and is meant for use in a controlled environment. This
device is not being placed on the market, leased or sold for use in a residential environment or for use by the
general public as an end user device.
This development platform is not intended to meet the requirements of a commercially available consumer
device including those requirements specified in the European Union directives applicable for Radio devices
being placed on the market, FCC equipment authorization rules or other regulations pertaining to consumer
devices being placed on the market for use by the general public.
This development platform may only be used in a controlled user environment where operators have obtained
the necessary regulatory approvals for experimentation using a radio device and have appropriate technical
training. The device may not be used by members of the general population or other individuals that have not
been instructed on methods for conducting controlled experiments and taking necessary precautions for
preventing harmful interference and minimizing RF exposure risks. Additional RF exposure information can be
found on the FCC website at

3.3 Anti-Static Handling Procedures

The Open-Q 820 Development Kit has exposed electronics and chipsets. Proper anti-static precautions
should be employed when handling the kit, including but not limited to:
• Using a grounded anti-static mat
Using a grounded wrist or foot strap
•

3.4 Kit Contents

The Open-Q 820 Development Kit includes the following:
Open-Q™ 820 SOM with the Qualcomm APQ8096 processor or main CPU board
•
Mini-ITX form-factor carrier board
•
4.5" FWVGA (480x854) 16.7 M LCD (Additional Accessory)
•
AC power adapter and HDMI cable
•
Open-Q™ 820 Dev Kit User Guide
http://www.fcc.gov/oet/rfsafety/
Open-Q™ 820 Development Kit
11