Safety; Installation And Maintenance Safety; Operational Safety - BOON EDAM Speedlane 900 Operation Installation And Maintenance

2 Safety

2.1 Installation and maintenance Safety

2.2 Operational Safety

Page: 7
Version: 2014/11
Edition: SL900 -OIM - USA
WARNING!
Switch off the power supply of the product before working on the product.
WARNING!
When the power supply cannot be switched off, service and maintenance
activities are to be undertaken only by trained engineers fully aware of potential
danger involved.
WARNING!
Be aware and avoid contact with moving parts.
WARNING!
Check that all safety devices and systems are fully operational after installation
of the product or after maintenance has been carried out.
WARNING!
It is not allowed to make changes or switch off any safety features without
authorization from Boon Edam.
WARNING!
Make sure that the dynamic and static forces are within the permissible values.
See Safety Instruction for further details.
CAUTION!
The material may be damaged or the operation of the product affected if the
installation procedure is not followed correctly.
CAUTION!
Some of the electronic components in the products covered by this manual
contain Electro Static Discharge (ESD) sensitive devices. It is highly
recommended that service and maintenance engineers follow the ESD
guidelines and procedures when handling such devices.
WARNING!
Any children or minors using the product must be supervised and
accompanied by a responsible adult. Boon Edam does not accept any liability
if this rule is not enforced.
WARNING!
This product should not be considered as a playground.
OIM - Manual
Speedlane 900