Changing The Frequency Inverter Parameter Set - BOON EDAM Speedlane 900 Operation Installation And Maintenance

10 Changing the frequency inverter parameter set

The main parameters are factory set by Boon Edam.
The supplier of the FI sets all other parameters.
NOTE!: Changing the parameter set should only be carried out when troubleshooting has revealed
that the Speedlane 900 is free from any malfunctions.
NOTE!: Only a limited number of parameters may be changed.
It is important to know that not all parameters are given here. Each Speedlane 900 type has a
different parameter set to give the best operation.
Type
Standard
High
Wide
Long
General parameter description is given.
No. Function
Pr.00 Start up boost
Pr.01 Maximum speed
Pr.02 Minimum speed
Pr.03 Voltage Pr.19 by Freq.
Pr.19 Voltage by Freq. Pr.03
Pr.125 Terminal 2 gain
Page: 55
Version: 2014/11
Edition: SL900 -OIM - USA
WARNING!
Risk of personal injury or loss of life.
CAUTION!
The material may be damaged or the operation of the product affected.
900 900-H 900-W
X
X
X
Variations of the Speedlane 900
Description
Start up boost setting
Maximum speed setting
Minimum speed setting
Frequency at voltage Pr.19
Voltage at frequency Pr.03
Change the frequency at maximum analog input
General parameter description
900-L 900-HW 900-HL
X
X
X
900-LW 900-HLW
X X
X X
X X X
Unit
%
Hertz
Hertz
Hertz
Volt
Hertz
OIM - Manual
Speedlane 900