Free In/Out Mode; Frequency Inverter Model; Restore Default Settings (Service Item) - BOON EDAM Speedlane 900 Operation Installation And Maintenance

8.3.18 Free In/Out mode

In the "Free In/Out mode" selection the choices "Normal" or "Special" can be made.
Normal mode.
When a person enters the Speedlane the door wings open and after passing the door wings they
close again. However when someone holds his hand over the ingoing sensors the door wings will
open allowing persons from the other direction to pass the Speedlane.
Special mode.
When someone enters from the other direction the door wings will close before that person can
pass them.

8.3.19 Frequency Inverter Model

In this menu you can select the model of frequency inverter which is used: Mitsubishi FR-D or
Omron V7.

8.3.20 Restore Default Settings (Service item)

It is possible to restore all default settings in the Selection Menu with one action. The default
values are set by pressing 'Enter' in the menu 'Default' in level two. After ten seconds the
Speedlane 900 will reinitialise and all the adjustments are restored to the factory settings.
Page: 51
Version: 2014/11
Edition: SL900 -OIM - USA
OIM - Manual
Speedlane 900