Opening The Speedlane Before Installation; Removing Top Plate - BOON EDAM Speedlane 900 Operation Installation And Maintenance

5.4 Opening the Speedlane before installation

As the units come pre-assembled, the top and side panels need to be taken off before anchoring
the unit to the floor.

5.4.1 Removing top plate

To be able to take the side panels out the top plate(s) need to be removed.
For all high units the top plate comes in two sections.
Insert an Allen key wrench and loosen the Allen bolt
Page: 27
Version: 2014/11
Edition: SL900 -OIM - USA
1. Lift the end up.
3 Lift the top plate out.
2 Pull the top plate.
OIM - Manual
Speedlane 900