Field 2; Field 3; Field 4; Field 5 - BOON EDAM Speedlane 900 Operation Installation And Maintenance

11.1.2 Field 2

Select the blocks to be erased in block 2.
NEVER choose the option Erase all Flash + Security!!!
Choose the option Erase blocks used by Hex File.

11.1.3 Field 3

Select the hex file, which has to be uploaded into the microprocessor.
Use the browse button to select the Hex file.

11.1.4 Field 4

In block 4 the Verify after programming option has to be chosen, the rest can stay blank.

11.1.5 Field 5

Press the Start button to start the uploading. Wait till Start is displayed again, the program is now
ready for another upload to the next microprocessor. For each new upload cycle, only Start needs
to be pressed.
To leave the programming mode and to enter the normal operating mode, press the right (Reset)
button and release it.
Page: 59
Version: 2014/11
Edition: SL900 -OIM - USA
OIM - Manual
Speedlane 900