General Installation; Packaging; Tool Requirements; Anchoring Methods - BOON EDAM Speedlane 900 Operation Installation And Maintenance

5.1 General installation

5.1.1 Packaging

Each Speedlane 900 cabinet will arrive individually packaged.
The following approximate crate sizes and weight apply:
Speedlane Model
900
900 High
900 Wide
900 High Wide

5.1.2 Tool Requirements

The following tools are needed for installation of the Speedlane 900 units.

Basic SAE End wrench set.

Basic SAE Socket Set.

SAE Allen Wrench Set.

Precision Flat Blade Screw Driver, 1.5-4mm.

Hammer Drill with rotary hammer drill bits (for concrete anchoring).

Masonry Anchor Kit.

4' Level.

Tape Measure.

Electrical Fish Tape (for pulling cables).

Electrical Wire Stripping and Cutting Pliers.

4" to 6" Nylon Cable Ties.

5.1.3 Anchoring Methods

There are many anchoring methods.
Typically, Speedlanes are anchored to concrete slabs.
Boon Edam recommends using 3/8" masonry anchors or 10mm wired rods and chemical anchors.

5.1.4 Connections

Please use the following torque values for bolt connections, unless stated differently in the
installation manual.
Page: 21
Version: 2014/11
Edition: SL900 -OIM - USA
Length Width
70" (1780 mm)
24" (620 mm)
70"
24"
70"
31" (810 mm)
70"
31"
Sample Masonry Anchors
Bolt size Torque value
M10 47 Nm
M 8 24 Nm
M 6 10 Nm
Height Weight
49" (1250 mm) 618 Lbs. (280 Kg)
49" 705 Lbs. (320 Kg)
49" 705 Lbs. (320 Kg)
49" 925 Lbs. (420 Kg)
OIM - Manual
Speedlane 900