General Information; Introduction; Copyright; Liability - BOON EDAM Speedlane 900 Operation Installation And Maintenance

GENERAL INFORMATION

1 Introduction

This manual is written for the service and installation engineer, it provides information about:

Operating the Product.

Installing the Product.

Electrical characteristics of the Product.

Maintenance on the Product.
Please read this manual carefully, it contains information that will assist you with all aspects of
installation and maintenance, including operation of electrical parts, so that a long and useful
machine life can be achieved.
This manual has been written with the maximum care and attention. Nevertheless, if certain parts
are unclear to you or contain errors, you can contact the Boon Edam manufacturing facilities.
Boon Edam B.V.
Ambachtstraat 4
1135 GG Edam
The Netherlands
T +31 (0)299 380808
F +31 (0)299 372859

1.1 Copyright

This manual was prepared and issued by Boon Edam. All rights are reserved. The information in
this manual is property of Boon Edam. Disclosure of this information or any part of it to third parties
is not permitted, except with prior and express written permission of Boon Edam.

1.2 Liability

The product is designed, tested and produced in accordance with strict international regulations.
Correct operation can only be assured when regular maintenance is undertaken annually (subject
to frequency of use) by Boon Edam or an approved agent. For replacement, original parts should
be used, so that a correct operation is guaranteed. The warranty on the product will end
prematurely if the product is installed or maintained by unapproved engineers.

1.3 Product modifications

Boon Edam makes every effort to ensure that this manual is reviewed whenever significant
changes are made to the design. However, Boon Edam has the reserved rights to improve her
products without notice. Therefore it is possible that the installed products show some differences
with the description in this manual.

1.4 Product options

The options of the product are marked with an asterisk (*) in the text of this manual. The options
that are actually included on the product manufactured are mentioned on the drawing list of the
enclosed drawing.
Page: 5
Version: 2014/11
Edition: SL900 -OIM - USA
Beijing Boon Edam Entrance
Technology Co. Ltd.
No.10 Tong Ji Bei Lu
Beijing Economic & Technological
Development Area
Beijing 100176
China
T +86 (0)10 67877766
F +86 (0)10 67877805
Boon Edam Inc.
402 McKinney Parkway
Lillington
North Carolina 27546
United States of America
T +1 (910) 8143800
F +1 (910) 8143899
OIM - Manual
Speedlane 900