Maintenance; General; Electrical; Mechanical - BOON EDAM Speedlane 900 Operation Installation And Maintenance

MAINTENANCE

13 Maintenance
For detailed troubleshooting information please refer to chapter 14 Troubleshooting.

13.1 General


The technician should report to a contact or to the reception desk and should always ask if
there are any particulars.

Make sure to write down any remarks made by the customer on the checklist.

Perform a visual check for broken glass (sharp edges) or other damages.

Check the whole unit for unusual noises.

Check the details of the location on the maintenance checklist (product type, product no.).

In case of malfunctions events can be viewed using in the error state.

Remove the top plate and side cover to get access to the drive system and electronics.

Check out with contact and/or at reception desk.

13.2 Electrical


Check the safety functions.

Perform a function test, control panel functions.

Check the operation of the sensors.

Check earth screen and earth leads.

Check the electrical wiring, especially for damages near moving parts.

Check the motor unit and brake.

13.3 Mechanical


Check the floor mountings and fasten where needed.

Check the motor mountings and fasten where needed.

Check the whole installation for correct alignment with floor (surroundings).
Page: 63
Version: 2014/11
Edition: SL900 -OIM - USA
OIM - Manual
Speedlane 900