Troubleshooting; Microcontroller Board - BOON EDAM Speedlane 900 Operation Installation And Maintenance

TROUBLESHOOTING

14 Troubleshooting

14.1 Microcontroller Board


Check the fuse when the LCD-display of the MCB does not work.
The fuse is located in the power connector.
When the fuse appears to be all right, the MCB might need to be replaced.

Try powering down the whole Speedlane 900 by shutting down the UPS and waiting for
approx. 30 seconds before powering it back up.

Check the connections of the Multibeam.

Check error state of the Speedlane 900.
Page: 65
Version: 2014/11
Edition: SL900 -OIM - USA
WARNING!
Switch off the power supply of the product before working on the product.
WARNING!
Risk of personal injury or loss of life.
CAUTION!
All installation and maintenance work on the product must be carried out by
Boon Edam personnel or by an approved agent.
CAUTION!
The material may be damaged or the operation of the product affected.
OIM - Manual
Speedlane 900