Installation Of High Cabinet Glass - BOON EDAM Speedlane 900 Operation Installation And Maintenance

5.6.1 Installation of high cabinet glass

As mentioned the glass of the high Speedlanes will be delivered separate and needs to be
installed on site.
Loosen the two clamping screws.
Insert the glass
Make sure that:
- The sensor wires are free.
- Cut out in glass is on the correct side.
(Intermediate units have them on both sides.
Position the glass over the cut-out and lower it in.
Tighten the clamping screws again.
Page: 33
Version: 2014/11
Edition: SL900 -OIM - USA
OIM - Manual
Speedlane 900