Uploading Speedlane 900 Software; Uploading The Software - BOON EDAM Speedlane 900 Operation Installation And Maintenance

11 Uploading Speedlane 900 software

11.1 Uploading the software

In some cases the Speedlane 900 software will need to be updated.
The computer program Flash Magic is used to upload the Speedlane 900 software into the
microprocessor. Connect your computer to the communication port on the MCB.
To enter the programming mode carry out the following steps:
1. Press left button and keep pressed
2. Press right button
3. Release right button
4. Release left button
The controller is now in the programming mode.
On the traffic display both the red cross (
Page: 57
Version: 2014/11
Edition: SL900 -OIM - USA
MCB

) and the green arrow (
Communication port (db9)
Right (Reset)
Left

) are lit.
OIM - Manual
Speedlane 900