Parameters Of The Im 153-X - Siemens SIMATIC ET 200M Manual

8.2

Parameters of the IM 153-x

Parameter Assignment
Assign parameters to the IM 153-x and the ET 200M with STEP 7 or
COM PROFIBUS. If you use another configuration tool, you must integrate the
device master file.
Table 8-2 Parameters of the IM 153-x
Parameters
DPV1 mode
Startup if preset
configuration0actual
configuration?
"Module change
during operation"?
Diagnostic interrupt
Process interrupt
Removal and insertion
interrupts
Analog-value format
Enhanced diagnostics
Module diagnosis
Module status
Channel-specific
diagnosis
Distributed I/O Device ET 200M
EWA-4NEB780600602-06
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Value Range Default
Disable/enable Enable
Yes/no No
Yes/no No
Disable/enable Enable
Disable/enable Enable
Disable/enable Enable
SIMATIC S 7/ SIMATIC S7
SIMATIC S 5
Yes/no No
Disable/enable Enable
Disable/enable Enable
Disable/enable Enable
Technical Specifications
Applicability
ET 200M
ET 200M
ET 200M
ET 200M
ET 200M
ET 200M
ET 200M
ET 200M
Configuration:
see Section 6.4.1
No: 29 bytes;
Yes: 64 bytes in the case
of the IM 153-1 and 96
bytes in the case of the
IM 153-2 diagnostic frame
ET 200M
ET 200M
ET 200M
8-7