Parameters - Siemens SIMATIC ET 200S Manual

Parameters

2.1 Parameters
Parameters for the 2AI I 2WIRE HS analog electronic module
Table 2-1
Parameters
Group diagnostics
(parameter assignment
error, internal error)
Diagnostics:
Overflow/underflow
Diagnostics: Wire
break*
Smoothing
Hardware interrupt
enable
Type/range of
measurement
High limit
Low limit
* Only in the measuring range 4 to 20 mA
Note
If you deactivate a channel of the electronic module, you do not gain any advantages in
terms of speed due to the measuring procedure.
2AI I 2WIRE HS analog electronic module (6ES7134-4GB52-0AB0)
Manual, 01/2008, A5E01001734-02
Parameters for the 2AI I 2WIRE HS analog electronic module
Range of values
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
None
•
Weak
•
Medium
•
Strong
•
Disable
•
Enable
•
Deactivated
•
4 to 20 mA
•
0 to 20 mA
•
Low to high limit of the
•
overrange
Low to high limit of the
•
overrange
Default setting Applicability
Disable Module
Disable Module
Disable Channel
None Channel
Disable Module
4 to 20 mA Channel
Depending on the Channel
measuring range
Depending on the Channel
measuring range
2
13