Siemens SIMATIC ET 200M Manual page 234

R
Radio interference, 5-3
Rail, 1-6
fixing holes, 4-10
for active bus modules, 1-6, 4-8
for module change during operation, 4-8
order number, A-1
installing, 4-8
lengths, 4-4
protective conductor connection, 4-11
RC network
for ungrounded configuration, 1 Mohm, 9-8
integrated, 5-9
Recycling, vi
Redundancy
switchover time, 8-13
time stamping, 3-7
with the IM 153-2, 3-10
configuration rules, 4-5
Redundant systems, Glossary-8
Reference potential, Glossary-8
ungrounded, 5-9
Regulations, on operating the ET 200M, 5-2
Release. See version
Removal interrupt, 6-29
Removing and inserting. See changing
modules during operation
Replacing
active bus module, 7-13
IM 153-1, 7-3
IM 153-2, 7-4
IM 153-2 FO, 7-4
Replacing modules
with the module change during operation
function, 7-11
without the module change during operation
function, 7-8
Response Monitoring, Glossary-9
Response time, 8-12, Glossary-9
Rules, general, on operating the ET 200M, 5-2
S
S7 diagnostics, Glossary-9
Scope of validity of the manual, iii
Segment, Glossary-9
Shield contact element, 5-21
Shield terminal, 5-21
Ship-building, approval, 8-5
Signal module, 1-7, Glossary-9
Distributed I/O Device ET 200M
EWA-4NEB780600602-06
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SIMATIC TOP connect, 1-7
Simplex connectors, order number, A-2
Single-channel I/Os, Glossary-5
Slave, Glossary-9
Slave diagnosis, 6-17
Slot numbers, 4-15
Standard configuration, installing, 4-12
Standards, 8-2
Startup
IM 153-1, 6-4
IM 153-2, 6-5
with time stamping, 6-7
IM 153-2 FO, 6-5
with time stamping, 6-7
of the system, 5-2
Startup characteristics, without response
monitoring, 153-1AA02, 9-3
Station diagnosis, 6-38
Station statuses 1 to 3, 6-19
STEP 7, Glossary-10
Strain relief, 5-19
Stripping lengths, 5-13
Substitute value, Glossary-10
Supply
24 V DC , 5-3
grounded, 5-5
Supply isolating switch, 5-3
Switchover time, in the case of redundancy,
8-13
SYNC, Glossary-10
System, redundant, Glossary-8
T
Technical specifications
general. See Module Specifications
Reference Manual
IM 153-x, 8-9
Terminating resistor, Glossary-10
Time delay, ET 200M, 8-12
Time stamp, Glossary-10
Time stamping, Glossary-11
process interrupt, 6-36
startup of the IM 153-2, 6-7
startup of the IM 153-2 FO, 6-7
with IM 153-2, 3-6
with redundancy, 3-7
Time synchronization, Glossary-11
sample configuration with ET 200M, 3-6
TN-S system, 5-7
Index
Index-5