Clock-Synchronized Interrupts" Dialog Box - Siemens SIMATIC ET 200M Manual

Procedure for Parameterizing Clock Synchronism
1. Settings at the CPU:
"Object Properties" of the CPU > "Clock-Synchronized Interrupts" tab
– Set CPU clock-synchronized interrupt.
– Select the used DP master system.
– Select the desired subprocess image.
– Recommended delay time:
Accept the default setting.
Memory
General
Priority
25
OB 61: 25
Figure 3-7

"Clock-synchronized interrupts" dialog box

Distributed I/O Device ET 200M
EWA-4NEB780600602-06
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Interrupts Time Interrupts
Startup Clock-Synchr. Interrupts
DP Master Subprocess Image(s)
System No. (e.g.: 1.4)
1 1
Configuration Options with the ET 200M
Cyclic Interrupts Diagnostics / Clock
Cycle / Clock Flag
Time Delay
Default
Protection
Remanence
3.000 ms
3-17