Parameters - Siemens SIMATIC ET 200S Manual

Parameters

2.1 Parameters
Table 2-1 Parameters for analog output module
2AO U ST
Group diagnostics (parameter
assignment error, internal error)
Diagnostics: Short circuit to M
Response to CPU-/master-STOP
Type/range of output
Substitute value
2
No diagnostics detection between -0.296 V and +0.296 V
1
If there is no voltage being supplied to the interface module or COMPACT module but the supply to the analog output
2
modules continues, the substitute values that have been assigned parameters are output. Substitute values must be within
the nominal range. You can assign values from -27648 to +27648 as parameters (when assigning parameters using the
GSD file).
2AO U ST analog electronic module (6ES7135-4FB01-0AB0)
Manual, 04/2007, A5E01076916-01
Range of values
Disable
•
Enable
•
Disable
•
1
Enable
•
No output current and voltage
•
Substitute a value
•
Keep last value
•
Deactivated
•
1 V to 5 V
•
± 10 V
•
To 65,535 (value range must lie
within the nominal range)
Default setting
Disable
Disable
No output current and
voltage
± 10 V
± 10 V: 0 V
1 to 5 V: 1 V
2
Applicability
Module
Channel
Module
Channel
Channel
11