Mechanical Configuration; Horizontal And Vertical Installation; Clearance Measurements; Arrangement Of The Modules In An Et 200M Configuration - Siemens SIMATIC ET 200M Manual

Installation
4.1

Mechanical Configuration

In This Section
Section
4.1.1

Horizontal and Vertical Installation

4.1.2

Clearance Measurements

4.1.3

Arrangement of the Modules in an ET 200M Configuration

4.1.4 Rules for Configuring the "Module Change During Operation" and
"Redundancy" Functions
4.1.1 Horizontal and Vertical Installation
You can install the ET 200M horizontally or vertically.
Permissible Ambient Temperature
S Horizontal installation
S Vertical installation
Installing the ET 200M together with IM 153-1AA8x (outdoor) and outdoor modules
extends the specified temperature range to –25 °C.
Figure 4-1

Horizontal and vertical installation of an ET 200M

4-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Subject
From 0 to 60 _C
From 0 to 40 _C
Horizontal installation
You must always position the IM 153-x and the
power supply at the bottom or on the left.
Vertical installation
Page
4-2
4-3
4-4
4-5
Distributed I/O Device ET 200M
EWA-4NEB780600602-06