Video Signal Transmission - Example - Lightware MX2M-FR24R User Manual

   
5. Hybrid Modular Matrix Concept
5.1.2. Video Signal Transmission - Example
The Concept
The matrix frame is installed with seven different type of I/O boards:
Connection
I/O board
MX2M-4HDMI20-IB HDMI
MX2M-DH-4DP12-IB DisplayPort
Multimode fiber
MX2M-4OPTJ-IB
optical
MX2M-4HDMI20-OB HDMI
Multimode fiber
MX2M-4OPTJ-OB
optical
Signal
Connected device
interface direction
Input Blu-ray player
Input MacBook
4K PC over a HDMI20-OPTJ-TX90 fiber
Input
optical transmitter
Output 4K TV
Wall display over a HDMI20-OPTJ-RX90
Output
fiber optical receiver
Applied firmware package: v1.0.0 | LDC software: v2.4.0b3
Hybrid Modular Matrix Switcher series – User's Manual
The video signals of the input boards can be routed to any ports of the output boards. The video crosspoint
settings can be set by four different methods:
▪ Front panel buttons - see the details in the
Built-in website / Lightware Device Controller (LDC) software - see the details in the
▪
▪ LW3 protocol commands - see the details in the
Available Video Related Settings
The following settings and options are available for the video stream input:
MX2M--4HDMI20-IB and MX2M--4OPTJ-IB boards:
▪ Input port HDCP capability setting
MX2M-DH-4DP12-IB board:
Sampling pattern conversion to 4:2:2 or 4:2:0
▪
▪ Color depth conversion to 8 bit per channel
▪ Input port HDCP capability setting
The following settings and options are available for the video stream output:
▪ Sampling pattern conversion to 4:2:2
▪ Input port HDCP capability setting
▪ Audio stream embedding setting
Switching Operations section;
Crosspoint Menu
Video Switching and Crosspoint Settings section.
38
section;