Mounting A-D Conversion Bypass Capacitors - Renesas M306K9T2-CPE User Manual

3.4 Mounting A-D Conversion Bypass Capacitors

There is a foot pattern on the M306K9T-EPBM board for mounting bypass capacitors for the A-D
conversion circuit near the MCU. Mount suitable bypass capacitors as occasion demands. Figure 3.6
shows where they are installed and the configuration of this product.
Figure 3.6 Foot pattern for A-D conversion bypass capacitors
SW1 P87
AV
AV
Note on the A-D Converter Function:
• Because a converter board and other devices are used between the evaluation MCU
and the target system, the A-D converter operates differently from that of an actual
MCU. Make the final evaluation of the A-D converter with an actual MCU.
M306K9T-EPBM
REV.A
XCIN SW2 P86 OPEN SW3 OPEN
AV
SS SS
V
CC REF
IMPORTANT
( 35 / 56 )
XOUT
C1: V -AV bypass capacitor
REF SS
C2: AV -AV bypass capacitor
CC SS