Chapter 2. Usage
2.1 Name of Each Part
(1) System Configuration
Figure 2.1 shows the system configuration for this emulator.
Figure 2.1 System configuration
(1) Emulator M306K9T2-CPE (included)
(2) USB interface cable (included)
(3) Power supply for emulator (not included)
(4) Target system (not included)
(5) Power supply for the target system (not included)
(6) Host machine (not included)
Host machine
(not included)
This is a compact emulator for the M16C/6K Group M306K9 of 16-bit microcomputers with the
real-time trace functions (hereafter, emulator).
This is an interface cable for the host machine and the emulator.
This is a power supply for the emulator. Supply 5.0 V ±5% (DC).
Prepare the power supply separately. The power cable is included with this product.
Note: Be aware that there are some AC adapters whose power supply voltage varies rather widely
with its load. You are recommended to use an AC adapter with a switching power supply or a
stabilized power supply.
This is your application system. This emulator can be used without the target system.
This is a power supply for the target system. As this emulator cannot supply the power to the target
system, supply the power to the target system separately from the emulator.
This is a personal computer for controlling the emulator.
Power supply for emulator
(not included)
USB interface cable
( 16 / 56 )
Power supply
for target system
(not included)
Upper part: emulator
Lower part: target system