Wall Installation; Attach The User Protection - Honeywell EWA600C-RF55C Operating And Installation Instructions

Wall installation

Variants with removable calculator unit can be installed up to max. 40 cm away
from the fl ow sensor using the optional wall bracket EWA600C-WM.

Attach the user protection

The meter is delivered with two twister seals which can be used to seal the
temperature sensor and the measuring tube screw fi tting.
To seal the unit proceed as follows:
(1) Thread the wire of the seal through the seal bore holes of the union nut
on the inlet, on the EAT and on the fl ow sensor or sensor screw fi tting and
immersion sleeve.
(2) Insert the wire through the opening in the seal body and pull it tight.
(3) Fold the seal closure over and click fi rmly to press it completely fl ush to the
seal housing.
(4) Cut off excess seal wire.
V2.0 / 21.12.17
(1) Attach the spacer (a) and wall bracket
(b) in the required position using the
enclosed material. Align the wall bracket
in such a way that the groove (b1) is
pointing downwards.
(2) Fit the cover (c) in such a way that
the marking "TOP2" can be read
horizontally, and click it into the wall
bracket.
(3) Take the calculator unit off the fl ow
sensor, unwind the calculator unit
(4) Firmly latch the calculator unit into the
wall bracket.
MU2H-0491ge23 R1217 31 EN