2N NetSpeaker Complete Manual page 93

Caution
Mounting Hole Spacing and Motherboard Size
Figure: 2N
Electric Installation
It is very easy to connect
below to avoid equipment damage or electrical injury:
1. Connect the audio signal output with an external amplifier.
2. Connect the digital input and output.
3. Insert the microSD card.
4. Connect the UTP cable.
5. Connect a 12V power supply.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
You are advised to make the Reset button accessible to the user for
factory reset.
® NetSpeaker Lite PCB
2N ®
Mounting Hole Spacing and Motherboard Size
NetSpeaker Lite PCB electrically. Follow the steps
93