2N NetSpeaker Complete Manual page 71

1. 12V DC/2A power supply adapter connector
2. Alternative power supply connection terminals
3. Relay output with galvanic isolation for external 24V/1A AC/DC load switching
4. Digital input 5 – 24V (without galvanic isolation) for external sensor/button, etc.
5. 10/100BASE–TX LAN RJ–45 connector
6. RESET button
7. Headphone/line output for standard headphones/external amplifier
8. Universal buttons with programmable functions
9. MicroSD card slot for higher internal memory capacity
10. Infrared signal receiver for remote control
11. Operational status colour LED indicators
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Figure: 2N® NetSpeaker Lite
Figure: 2N® NetSpeaker Lite
Front Panel
Back Panel
71