Page 1
® 2N NetSpeaker IP Audio System Manual Version www.2n.cz...
Page 2
At present, we export our products into over 120 countries worldwide and have exclusive distributors on all continents. ® 2N is a registered trademark of 2N TELEKOMUNIKACE a.s.. Any product and/or other names mentioned herein are registered trademarks and/or trademarks or brands protected by law. 2N TELEKOMUNIKACE administers the FAQ database to help you quickly find information and to answer your questions about 2N products and services. On www.faq.2n.cz you can find information regarding products adjustment and instructions for optimum use and procedures...
® connection of the NetSpeaker units to the NetSpeaker Server ® Virtual Network adapters may cause malfunction of some 2N NetSpeaker Server components. ® NetSpeaker Server allows you to use all features of this system for 800 hours, which is a trial licence. Without licences, you can ...
Installation Preparation ® You need your NetSpeaker unit, a 12V/2A DC power supply or PoE switch (excep ® t for NetSpeaker Lite , the UTP cable and a PC with Windows Vista or newer or Windows Server for installation. Figure: 2N® NetSpeaker System in Network Environment Installation ® NetSpeaker Server installation and configuration: ® Launch the NetSpeaker Server installer on the PC used as a server. After installation you will be asked to restart the PC, so please do that in order to continue installation. ® NetSpeaker Configuration wizard starts automatically after restart (see the figure below). ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 5
® Figure: 2N NetSpeaker Configuration Wizard Follow all the Configuration Wizard steps to configure your system. ® NetSpeaker Virtual Sound Card installation and configuration: ® Launch the NetSpeaker Virtual Sound Card installation wizard. ® Start the NetSpeaker Virtual Sound Card, use the right mouse button to access the menu and log in using the username and password created by Configuration Wizard.
Page 6
Figure: Application Virtual Sound Card and Login Screen ® Now you can control the NetSpeaker in your network (see the figure below) and play music from your favourite player or service. ® Figure: Select NetSpeaker in Virtual Sound Card Application and play your music ® All these steps should be sufficient to set up the NetSpeaker system in your local network. In case of troubles or for a more advanced set-up please refer to the manual ® at wiki.2n.cz or in 2N NetSpeaker ControlPanel. ® TELEKOMUNIKACE a.s., www.2n.cz...
Page 7
® TELEKOMUNIKACE a.s. hereby declares that this product complies with all basic requirements and other relevant provisions of the 1999/5/EC directive. For the full wording of the Declaration of Conformity see www.2n.cz. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ® TELEKOMUNIKACE a.s., www.2n.cz...