2N NetSpeaker Complete Manual page 37

Scheduler
What you should know
Scheduler
Scheduler is used for creating actions used for control of playlists or sessions. You can
schedule various actions for the playlists and assign them to time. A set of actions for
playlists is called
within one event. Fig.1 shows an example of event with two sessions. One contains a
playlist, the other is without a playlist.
Event Creation
As mentioned above, the event is a set of actions that are executed over playlists or
other sources included in sessions. Therefore, prepare a session including the required
playlists before creating an event. Only then you can start creating an event as follows:
Procedure:
Create a new event – use one of the following methods: click the
then Create event
before creation by clicking the required day and then
®
2N TELEKOMUNIKACE a.s., www.2n.cz
If the Create actions for session activation and deactivation automatically
option is enabled, session activation/deactivation is set together with the
first action for the session.
If you power up the server while the event 'is in progress', the actions will
not be performed. The server must always be activated before the
beginning of the event.
The session activation action automatically enables all playlists in the
session.
Event and you can control multiple playlists in multiple sessions
, or use the floating menu. Also, you can assign an event to a date
Scheduler
Create event .
tab and
37