2N NetSpeaker Complete Manual page 75

Ip audio system
Hide thumbs Also See for NetSpeaker:
Table of Contents

Advertisement

®
2N NetSpeaker Status Indicator (LED)
LED
Colour
Yellow
Green
Violet
Violet
Blue
Blue
Yellow
Orange
Orange
Orange
Power Supply Connection
®
2N
NetSpeaker Lite
interface via the RJ–45 connector on the back panel. Always use CAT–5d or higher
class cables for reliability reasons. The LAN interface is equipped with the Auto MDIX
function for automatic detection of a straight or cross–over cable.
®
2N
NetSpeaker Lite
supply, or another power supply on condition that you keep the nominal values
included in the Electric Parameters subsection.
Connect the 12V DC power supply either to the back panel supply connector marked
DC IN, or terminals marked DC IN + and DC IN –.
Warning
®
2N NetSpeaker Lite Factory Reset
In some cases, it may be useful to reset the
using the RESET button on the back panel. Do this, for example, if 2N
Lite
ceases to respond, which may be caused by incorrect LAN settings, LAN
configuration changes, forgotten password and so on.
Resetting Procedure:
1.
®
2N
TELEKOMUNIKACE a.s., www.2n.cz
LED Status
Meaning
®
shining
2N
®
2N
shining
NetSpeaker Server
®
shining
2N
®
flashing
2N
®
2N
flashing
server
®
shining
2N
®
2N
flashing
default after factory reset
flashing fast
Volume + / - / infra
flashing slowly
Blink
3 times
®
shining
2N
can be connected to a standard local area network using a LAN
can be fed using a 12V DC/2A (Part No. 914102E) power
If you use an adapter other than the recommended one, do not exceed
the nominal supply voltage value of 12V. Also make sure that the supply
voltage polarity is correct. Exceeding nominal values and/or incorrect
connection may lead to irreversible damage of the equipment.
NetSpeaker Lite
is booting or restarting
NetSpeaker Lite
is playing audio from 2N
NetSpeaker Lite
is playing audio from SD card
NetSpeaker Lite
is synchronising with SD card
NetSpeaker Lite
is ready, but not connected to
NetSpeaker Lite
is ready and connected to server
NetSpeaker Lite
is upgrading or starting from
NetSpeaker Lite
is in MUTE state
®
2N
NetSpeaker Lite
®
factory values
®
NetSpeaker
75

Advertisement

Table of Contents
loading

Related Products for 2N NetSpeaker

Table of Contents