2N NetSpeaker Complete Manual page 31

Figure: Initial View of 2N® NetStreamer via 2N® NetSpeaker Control Panel
VoIP Input
®
The SIP source helps you connect 2N NetSpeaker to a VoIP (Voice over IP) PBX as a
VoIP station via the SIP or a VoIP trunk. You have to know the PBX IP address,
username and password (if requested) and the port to establish connection to the PBX.
Refer to the subsections below for the parameters and setting options.
®
Another option is to allow direct VoIP calls to the 2N NetSpeaker Server by
choosing Local SIP input. Then you have to assign the source to a session. Now the 2N
®
NetSpeaker Server is able to receive direct VoIP calls from VoIP phones.
Figure: SIP Source Setting
31
®
2N TELEKOMUNIKACE a.s., www.2n.cz