Configuration Via Telnet Server - 2N NetSpeaker Complete Manual

Configuration via Telnet Server

By default, the parameters have the following factory values:
activemode
searchmode
volume
domain
dscr
dhcpclient
ipaddr
netmask
defaultgw
pwd
srvipaddr
srvport
srvpwd
Use the integrated Telnet server for basic 2N NetSpeaker
any Telnet Client application downloaded from the Internet, for example. By default, the
Telnet server listens at port 23.
Basic Parameter Settings
When the connection has been established,
number and the current firmware version. Enter the password, which is equal to the
connection authorisation password from the
parameter). The default password is admin.
Telnet Commands to 2N NetSpeaker
®
2N NetSpeaker
Enter the LC characters only, separate parameters, if any, with a space and confirm
every row with Enter.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Value
1 (ON)
1 (ON)
1024
®
Value is empty if 2N
®
Value is empty if 2N
1 (ON)
192.168.1.100
255.255.255.0
192.168.1.1
-
192.168.1.2
6999
-
®
can be controlled using the commands included in the table below.
NetSpeaker is not connected to server
NetSpeaker is not connected to server
®
settings. For connection, use
®
2N NetSpeaker
®
2N NetSpeaker Server
displays its serial
(i.e. pwd
59