2N NetSpeaker Complete Manual page 41

microSD
What you should know
The microSD tab is used for administration of SD cards inserted in the 2N®
NetSpeaker
setting of action starts.
microSD Tab Layout
Synchronisation actions related to the SD card (inserted in
managed via the microSD tab. The layout of this tab is rather complex. Refer to the
figure below for an overview of functions.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
The SD card must be FAT32 formatted before being inserted in 2N
NetSpeaker .
®
2N NetSpeaker has no RTC of its own. Connectivity to the server after
HW restart is required for successful time synchronisation. Connection
failures are irrelevant.
We recommend to synchronise up to 100 MB of the contents.
One action launched at time and one action launched by the button press
are always valid on one
The synchronisation rate depends on the SD (SDHC) card type.
The content is synchronised automatically at a defined time or manually
on the Destinations & Zones
The content is synchronised only if nothing is being played from the
server.
Volume from the online playback is kept for the SD card playback. There
is no separate SD card (offline) volume.
system, synchronisation of these cards with the defined content and
®
2N NetSpeaker .
tab.
®
®
2N NetSpeaker ) are
41