2N NetSpeaker Complete Manual page 14

Priority – set the session priority. The
preferred to lower priority sessions. A higher priority of the active Session
always guarantees
(the source will play in the destination). The priority range is <1;10>, where
priority 10 is automatically assigned to
Channel – set the channel for each session.
channels for 4 different sources. Set the channel for the
on the
Fade – set the session fade. The parameter can be used for a gradual sound
volume change. The fade range is <500;2000> ms.
Audio Sources
You can add multiple sources to each session. Use the
source (refer to
are two types of bars – one is designed for the Playlist and the other for the rest of the
sources. Fig.5 shows the two types.
Common bar – helps you control volume, balance and sound activation/deactivation.
The Internet radio contains a status line displaying information on playing.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
that the Session will occupy the destinations assigned to it
Destinations & Zones
Figure: Priority, Channel and Fade Settings
Audio Sources for details). Add the sources in the
Figure: Volume Bars
highest
Freeride role
2N
tab or by a remote controller on the site.
priority session is always
broadcasting.
®
NetSpeaker supports 4
®
2N NetSpeaker
Audio source tab to create a
Bar format. There
units
14