2N NetSpeaker Complete Manual page 27

User Input
User input is assigned to the user and defines the user audio stream parameters when
playing from the
input settings.
Generic RTP Input
Generic RTP input is a common audio input. All the devices that can transmit audio
using RTP protocol and codec G711, L16 can serve as a sound source for the session.
The sound source is defined by the listening port, the IP address (unless unicast, i.e. IP
address of the server). If the
multicast address, it is necessary to enter this address (then the specified port + IP
multicast is considered). You can define the source IP address to make the sound
source secure.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Console is used, for example. The figure below shows the default
Figure: User Input Parameters
2N® NetSpeaker Server listens on the defined
27