Parameters:
DHCP client on – select on/off to determine whether
use the network setting obtained from the network via the DHCP, or use the
statically set parameters.
IP address – 2N® NetSpeaker IP address.
IP mask – network mask.
IP gateway – network gateway.
Server IP address –
Domain –
the same domain.
of the servers in the network.
Description – enter optional details on the selected
Mode– select the passive/active/search mode.
Administration
Server Authorisation
Server authentication to 2N
authentication to
2N
NetSpeaker
Administrator
administrator password of the
®
2N
TELEKOMUNIKACE a.s., www.2n.cz
2N® NetSpeaker Server
2N® NetSpeaker
2N® NetSpeaker
Passive mode means that it is necessary to set connection to 2N
NetSpeaker
from the server side in the
NetSpeaker connections
Active mode means that
NetSpeaker Server
parameter.
Search mode means that
Server
in the network automatically, takes over the domain and gets
connected to the server.
®
2N
NetSpeaker
®
NetSpeaker authentication to server
authentication to server.
login
with the set domain is assigned to the server with
automatically takes over the domain of one
section.
®
2N
NetSpeaker
automatically using the
®
2N
NetSpeaker
Figure: Scanner
®
NetSpeaker
.
authentication
password
Administrator
user.
®
2N
NetSpeaker
IP address.
2N® NetSpeaker
NetSpeaker settings
gets connected to the
Server IP address
®
finds the
2N
NetSpeaker
– set the password for server
– set the password for 2N
–
change
shall
unit.
®
–>
®
2N
®
the
main
55