2N NetSpeaker Complete Manual page 43

Basic Parameters
These parameters define the behaviour of the action: its trigger and behaviour upon
start.
Action type – define the action trigger: either the logical input to
action
value and start day in
More possibilities for Actions are added by the
loss action types.
On logic input - the action starts in case of logical input. Refer to the Digital
Input and Output subsection in
At time - the action starts at the defined time.
On connection
2N
Play from SD - the action starts whenever the audio stream stops or gets
interrupted, e.g. Session is disabled,
Action duration – set the action end.
Specific time – set the action duration using the following
Repeat n–times – define how many times the playlists selected in the Playlist
shall be played. Use the
Never stop – make playing never stop. This option is particularly comfortable in
connection with the HW button: press the button once to start the action and
repress it to stop the action.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Figure: Synchronisation Properties
On logic input ) or a time value (
Action planning
loss -
®
NetSpeaker Server
At time ). If you select time, select the time
; refer to Subs. 6.1.3., Action Planning.
Play from SD
HW description
the action starts in case the connection gets lost e.g. the
power supply fails.
®
2N NetSpeaker Server
Repeat count item.
®
2N NetSpeaker
card and On connection
.
is down, etc.
Duration in (s)
(
field.
43