2N NetSpeaker Complete Manual page 87

Memory Card
2N ® NetSpeaker
case the equipment is not connected to the LAN permanently or temporarily. The
microSD card slot is available on
Connection
2N NetSpeaker Connection ®
2N ® NetSpeaker
interface via the RJ–45 connector on the back panel. Always use CAT–5d or higher
class cables for reliability reasons. The LAN interface is equipped with the Auto MDIX
function for automatic detection of a straight or crossed cable.
The LAN interface can also be used for the
active network elements or injectors meeting the IEEE 802.3af standard.
Caution
2N ® NetSpeaker
LAN interface. In case this option is unavailable, use a 12V DC/2A (Part No. 914102E)
power supply, or another power supply on condition that you keep the nominal values
included in the Electric Parameters subsection.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Figure:
is equipped with a microSD card slot for storing music or voice in
below.
can be connected to a standard local area network using a LAN
With PoE, the integrated amplifier power output is limited to 8W. To utilise
the maximum power output of the amplifier, feed 2N® NetSpeaker from
an external 12V DC/2A power supply.
can be fed using active network elements or PoE injectors via the
Logical Output
2N ® NetSpeaker , refer to the
2N ® NetSpeaker
2N® NetSpeaker
power supply through
87