2N NetSpeaker Complete Manual page 68

Memory Card
®
2N NetSpeaker
case the equipment is not connected to the LAN permanently or temporarily. The
microSD card slot is available on the
®
2N NetSpeaker Status Indicator (LED)
LED
Colour
Yellow
Green
Violet
Violet
Blue
Blue
Yellow
Orange
Orange
Orange
®
2N NetSpeaker Connection
®
2N NetSpeaker
interface via the RJ–45 connector on the back panel. Always use CAT–5d or higher
class cables for reliability reasons. The LAN interface is equipped with the Auto MDIX
function for automatic detection of a straight or crossed cable.
The LAN interface can also be used for the
active network elements or injectors meeting the IEEE 802.3af standard.
Note: With PoE, the integrated amplifier power output is limited to 8W. To utilise the
maximum power output of the amplifier, feed
DC/2A power supply.
Caution
®
2N NetSpeaker
LAN interface. In case this option is unavailable, use a 12V DC/2A (Part No. 914102E)
power supply, or another power supply on condition that you keep the nominal values
included in the Electric Parameters subsection.
Connect the 12V DC power supply either to the back panel supply connector marked
®
2N TELEKOMUNIKACE a.s., www.2n.cz
is equipped with a microSD card slot for storing music or voice in
LED Status Meaning
shining 2N® NetSpeaker is booting or restarting
2N® NetSpeaker is playing audio from 2N®
shining
NetSpeaker Server
shining 2N® NetSpeaker is playing audio from SD card
flashing 2N® NetSpeaker is synchronising with SD card
flashing 2N® NetSpeaker is ready, but not connected to server
shining 2N® NetSpeaker
2N® NetSpeaker is upgrading or starting from default
flashing
after factory reset
flashing fast Volume + / - / infra
flashing slowly 3
Blink
times
shining 2N® NetSpeaker is in MUTE state
can be connected to a standard local area network using a LAN
With PoE, the integrated amplifier power output is limited to 8W. To utilise
the maximum power output of the amplifier, feed 2N
an external 12V DC/2A power supply.
can be fed using active network elements or PoE injectors via the
®
2N NetSpeaker front panel.
is ready and connected to server
®
2N NetSpeaker
®
2N NetSpeaker
power supply through
from an external 12V
® NetSpeaker from
68