2N NetSpeaker Complete Manual page 76

1. Use a thin rigid tool to press the RESET button on the back panel.
2. Keep the RESET button pressed until the front green LED stops shining (for
approx. 10 s).
3. Release the button as soon as the LED starts flashing green. It means that the
configuration in the internal FLASH memory is being deleted.
This operation takes about 50 s. Do not disconnect the device from power supply
during this period.
Firmware Upgrade
®
2N
NetSpeaker Lite
that all connected devices have identical and latest firmware versions. Refer to
www.2n.cz
Operating Terms and Transport
Operating temperature: 0° to 40° C (32° to 104° F)
Operating humidity: 10 to 85 % (not condensing)
Permitted temperature range for product transport: -25 to +60 ° C (-13° to 140°
F)
®
2N TELEKOMUNIKACE a.s., www.2n.cz
NetSpeaker Lite firmware upgrade starts automatically whenever 2N
gets connected to the
for the latest firmware version.
®
2N NetSpeaker Server
®
. This guarantees
76