2N NetSpeaker Complete Manual page 107

Firmware Upgrade
®
2N
NetStreamer
all connected devices have identical and latest firmware versions. Refer to
or the latest firmware version.
®
2N NetStreamer Configuration
2N® NetStreamer allows
Control Panel
settings.
Logic input
Connecting the logic input of the
two options. The first option is that you are connecting to the input labeled
ally isolated supply +, 7V) and the input labeled
the input will respond to voltage switches to the input labeled
Factory Reset
In some cases, it may be useful to reset the
the RESET button on the lower panel. Do this, for example, if
s to respond, which may be caused by incorrect LAN settings, LAN configuration
changes, forgotten password and so on.
Resetting Procedure:
1. Use a thin rigid tool to press the RESET button on the lower panel.
2. Keep the RESET button pressed for 10 s.
3. Release the button.
This operation takes about 50 s. Do not disconnect the device from power supply
during this period.
Operating Terms and Transport
Operating temperature: 0° to 40° C (32° to 104° F)
Operating humidity: 10 to 85 % (not condensing)
Permitted temperature range for product transport: -25 to +60 ° C (-13° to 140°
F)
®
2N TELEKOMUNIKACE a.s., www.2n.cz
NetStreamer firmware
gets connected to the
set audio source to the
. Refer to the
upgrade starts
®
2N NetSpeaker Server
Audio Sources for more details on the 2N
2N® NetStreamer
1
®
2N
automatically whenever
. This guarantees that
®
Session via the 2N
®
NetStreamer
. To control the logic inputs are
(0V). The second possibility is that
1 (0V) and
NetStreamer factory values using
®
2N NetStreamer
®
2N
www.2n.cz f
NetSpeaker
+ (galvanic
GND .
cease
107