2N NetSpeaker Complete Manual page 72

®
2N NetSpeaker Lite Parameters
Parameter
Dimensions
Dimensions (incl.
L–profiles)
Weight
External power supply
LAN supply
Status signalling
Local control
Remote control
LAN connection
Power amplifier output
Frequency range
Harmonic distortion
Signal–to–noise ratio
Headphone/Line output
Digital output
Digital input
Memory capacity
extension
Sound compression
Bandwidth
Caution
Installation
If you intend to use your
the four feet included in the delivery onto the bottom side of the device to avoid
scratching of the underlying surface.
Surface Mounting:
Use the L–profiles (order no. 914105) to mount your 2N
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Value
105 x 34 x 86 mm
130 x 34 x 86 mm
300 g
12V DC / 2A
not supported
LED on front panel
2 buttons on front panel
infrared sensor on front panel
RJ–45 connector on back panel, TX with Auto–MDIX
function
not supported
20Hz – 20kHz (+/– 0.5dB)
0.05% @ 1kHz
91dB
STEREO 3.5mm jack on front panel
24V 1A AC/DC relay output, galvanically isolated
5 to 24V DC digital input, galvanically non–isolated
microSD card slot on front panel
MPEG–1 Audio Layer II (MP2)
32–320kbps
Be sure to connect the
step.
®
2N NetSpeaker Lite
2N® NetSpeaker Lite
unit in various interiors, please stick
power supply as the last
® NetSpeaker Lite unit on a
72