Adjusting The Speaker Level; Selecting The Recording Source - Yamaha RX RX-Z7 Owner's Manual

Before performing the following operation, set the operation
mode selector on the remote control to F AMP.

Adjusting the speaker level

You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the MULTI CH INPUT jacks.
Note
This operation will override the level adjustments made in the
automatic setup (page 35) and "Level" (page 94).
Press C LEVEL and then 9k / n repeatedly
1
to select the speaker you want to adjust.
Display
FRONT L
Front left speaker
FRONT R
Front right speaker
CENTER
Center speaker
SUR.L
Surround left speaker
SUR.R
Surround right speaker
SB L
Surround back left speaker
SB R
Surround back right speaker
FP L
Presence left speaker
FP R
Presence right speaker
SWFR
Subwoofer
y
The available speaker channels differ depending on the
speaker settings.
2
Press 9l / h on the remote control to
adjust the speaker output level.
Control range: –10.0 dB to +10.0 dB
Adjusted speaker

Selecting the recording source

Use this feature to select a source component from which
you want to record.
Press and hold C REC OUT until "REC
1
OUT" appears in the front panel display.
Rotate M PROGRAM to select the source
2
component.
y
To record the input source currently selected, select "SOURCE".
Note
When zone 4 is turned on, no signal is output at the DVR OUT,
VCR OUT and MD/CD-R OUT jacks.
Using audio features
55
En