Yamaha RX RX-Z7 Owner's Manual page 142

Troubleshooting
■ USB and Network
Problem
"No Device" is
displayed even when
a USB device is
present.
The music files and
directories in the USB
device cannot be
viewed.
The PC server/MCX-
2000/Internet Radio
does not function
properly.
The music in the PC
server cannot be
played back.
The MusicCAST
server cannot be
connected.
The Internet Radio
cannot be played.
This unit does not
recall the correct item
by using numeric
buttons (1-8).
This unit does not
recall the selected
item by using numeric
buttons (1-8).
142
En
Cause
This unit recognized the USB storage
device as an illegal device.
The music files and directories are placed
in locations other than the FAT area.
You are attempting to browse directory
hierarchies of over 8 levels or a directory
with more than 500 files.
The IP address is not set properly.
The network cable is not connected.
The PC does not have Windows Media
Player 11 or Windows Media Connect 2.0
installed in it.
The music is recorded in a format that
cannot be played on this unit. This unit
cannot play music formats other than
WMA, MP3, MPEG-4 AAC, and WAV
(PCM format). Also note that it cannot
play certain music files even if these are
recorded in the WMA, MP3, MPEG-4
AAC, or WAV format.
You are attempting to connect to MCX-
1000. The MusicCAST server that can be
connected by this unit is MCX-2000.
Auto Configuration is not executed.
The firewall of the network device is
activated. The Internet Radio can be
played only when it passes through the
port designated by each radio station. The
port number is variable depending on
radio station.
Connection to the Internet is
disconnected.
The connected USB device is incorrect.
The directory that stores the selected item
is changed.
The USB device is not connected
correctly.
The PC or MCX-2000 that stores the
selected item is turned off.
The selected Internet Radio station is
temporary unavailable or out of service.
Remedy
Turn this unit off then on again.
Place music files and directories in the FAT area.
Modify the data structure on your USB device.
Set the DHCP server function of the router to ON.
Alternately, perform manual configuration according
to the current operating environment.
Connect it properly.
Install Windows Media Player 11 or Windows Media
Connect 2.0 in the PC.
Play music recorded in a format that this unit is
compatible with.
Use MCX-2000 or the PC server.
Set your Yamaha MCX-2000 to the "Auto Config"
mode.
Check the firewall setting of the network device.
Check the configuration of the network device, and
then contact the network connection provider.
Connect the USB device that stores the preset item.
Preset the desired item to the numeric button (1-8)
again.
Connect the USB device properly.
Turn on the PC or MCX-2000.
Try again when the selected Internet Radio is
providing the service.
Preset other Internet Radio stations.
See
page
31
—
—
102
28
—
—
—
77
—
—
28
79
28
—
80
79